DCC CONTROL SYSTEMS
DCC DC INTERFACE
DECODER FOR TRAINTRONICS SIGNALS TT301
ModeltrainsUK at Cravenmodels 
Model Railway Accessories
Tel: 01588 660
580 cravenmodels@btconnect.com
|
|
|
|
|
|
OUR PRICE |
|
CM-TT301 |
Traintronics |
DCC DC INTERFACE
DECODER FOR TRAINTRONICS SIGNALS THIS IS NOT A |
|
11.75 |
Our Price 10.58 |
|
CM-TT301 |
Traintronics |
DCC DC INTERFACE DECODER
THIS IS NOT A FOR TRAINTRONICS
SIGNALS
Now you can run your colour light signals from your DCC Controller!. Once you have switched over the boards,
simply connect your DCC feed to the correct terminals and off you go! IT IS ASSUMED THAT YOU HAVE A GOOD KNOWLEDGE OF DCC SYSTEMS WARNING
DELICATE ELECTRICS / ELECTRONICS Beware
of STATIC ELECTRICITY on HANDS & TOOLS This Signal Kit contains delicate
electrics / electronic components. Please read the installation
instructions very carefully Several times.
If in any doubt please contact your Local
Electronics Expert. Ensure that you use the correct power supply. Incorrect installation
will cause instant failure and possible short circuiting. Cravenmodels Modeltrainsuk DCC and ELECTRONIC COMPONENT HANDLING. This Signal Kit contains delicate
electrics / electronic components. Please read the installation
instructions very carefully Several times.
If in any doubt please contact your Local Electronics Expert. Ensure
that you use the correct power supply. Incorrect installation will cause instant failure and possible short
circuiting. STATIC ELECTRICITY Static electricity refers to the build up of
electric charge
on the surface of objects. The static charges remain on an object until they
either bleed off to ground or are quickly neutralized by a
discharge. Although charge exchange can happen whenever any two surfaces come into
contact and separate, a static charge will only remain when at least one of
the surfaces has a high resistance to electrical flow (an electrical insulator). The effects of static electricity are familiar to most people because we
can see, feel and even hear the spark as the excess charge is neutralized
when brought close to a large electrical conductor (for example a path to
ground), or a region with an excess charge of the opposite polarity (positive or
negative). The familiar phenomenon of a static 'shock' is caused by the
neutralization of charge. Static electricity can reside in people, clothing or tools
etc. The static electricity must be discharged to EARTH before handling any
delicate electronic components or computer components. Use of Magnetic tools should be avoided at all times. PLEASE FOLLOW THE ENCLOSED INSTRUCTIONS VERY VERY CAREFULLY To view small print please increase your screen size to 200%
TO
VIEW SMALL PRINT - |
|
11.75 |
Our Price 10.58 |
OTHER TRAINTRONICS PRODUCTS
TRAINTRONICS COLOUR LIGHT SIGNALS
READY ASSEMBLED COLOUR
LIGHT SIGNALS
EASY TO INSTALL NO SOLDERING OF WIRES etc 2 TERMINAL BLOCKS INCLUDED.
Can operate with DCC Accessory Decoder if required
|
|
|
|
|
|
TRAINTRONICS AVAILABLE TO ORDER
Tel 01588 660 580
Please do NOT use a HORNBY
CONTROLLER to power these signals.
12v DC ONLY Required. Power supply below.
|
|
Fixed Voltage Regulated Mains Adaptor
230v AC to 12V DC 400mA Supply
CM-MG81C
£12.99 plus P & P |
WARNING DELICATE
ELECTRICS / ELECTRONICS
Beware of STATIC
ELECTRICITY on HANDS & TOOLS
DCC and ELECTRONIC COMPONENT HANDLING.
This Signal Kit contains delicate
electrics / electronic components. Please read the installation
instructions very carefully Several times.
If in any doubt please contact your Local Electronics Expert. Ensure
that you use the correct power supply.
Incorrect installation will cause instant failure and possible short
circuiting.
STATIC ELECTRICITY
Static electricity refers to the build up of electric charge
on the surface of objects. The static charges remain on an object until they
either bleed off to ground or are quickly neutralized by a
discharge.
Although charge exchange can happen whenever any two surfaces come into
contact and separate, a static charge will only remain when at least one of the
surfaces has a high resistance to electrical flow (an electrical insulator).
The effects of static electricity are familiar to most people because we
can see, feel and even hear the spark as the excess charge is neutralized when
brought close to a large electrical conductor (for example a path to
ground),
or a region with an excess charge of the opposite polarity (positive or
negative). The familiar phenomenon of a static 'shock' is caused by the
neutralization of charge.
Static electricity can reside in people, clothing or tools
etc.
The static electricity must be discharged to EARTH before handling any
delicate electronic components or computer components.
Use of Magnetic tools should be avoided at all times.
Warranty and Returns www.cravenmodels.com/TERMS.htm
Built-in Circuit Protection,
Fading In-Fading Out adjustment,
Plug & Play
Interface Circuit Board, LEDs for low power consumption.
TERMINAL BLOCKS
INCLUDED - NO SOLDERING REQUIRED
Easy to install - Just
follow enclosed instructions
DCC Compatible
Signal Identification
Numbers/Lettering included
|
PART No |
TRAINTRONICS SIGNALS |
DESCRIPTION |
GAUGE |
|
OUR PRICE |
|
CM-TT100 |
Traintronics |
100 Single Aspect Yellow c/w Interface Board |
OO |
TBA |
TBA |
|
CM-TT101 |
Traintronics |
101 Single Aspect Flashing White OO TBA |
OO |
TBA |
TBA |
|
CM-TT102 |
Traintronics |
102 2-Aspect Red/Green c/w Fading Interface
Board - Ground Mounted |
OO |
12.99 |
Our Price 11.95 |
|
CM-TT102H |
Traintronics |
102 HEAD ONLY 2-Aspect Red/Green c/w Fading
Interface Board
|
|
|
|
|
CM-TT103 |
Traintronics |
103 2-Aspect Yellow/Green c/w Fading
Interface Board - Ground Mounted |
OO |
12.99 |
Our Price 11.69 |
|
CM-TT103H |
Traintronics |
103 HEAD ONLY 2-Aspect Yellow/Green c/w
Fading Interface Board
|
|
10.99 |
Our Price 9.89 |
|
CM-TT104 |
Traintronics |
104 3-Aspect Red/Yellow/Green c/w Fading Interface
Board - Ground Mounted |
OO |
14.99 |
Our Price 13.49 |
|
CM-TT104H |
Traintronics |
104 HEAD ONLY 3-Aspect Red/Yellow/Green c/w
Fading Interface Board |
|
12.99 |
Our Price 11.69 |
|
CM-TT105 |
Traintronics |
105 3-Aspect Yellow/Green/Yellow c/w Fading
Interface Board - Ground Mounted |
OO |
14.99 |
Our Price 13.49 |
|
CM-TT105H |
Traintronics |
105 HEAD ONLY 3-Aspect Yellow/Green/Yellow
c/w Fading Interface Board |
|
12.99 |
Our Price 11.69 |
|
CM-TT106 |
Traintronics |
106 3-Aspect SPAD OO TBA |
OO |
TBA |
TBA |
|
CM-TT107 |
Traintronics |
107 4-Aspect Red/Yellow/Green/Yellow c/w
Fading Interface Board - Ground Mounted |
OO |
16.99 |
Our Price 15.29 |
|
CM-TT110 |
Traintronics |
110 2-Aspect Red/Green with feather left c/w
Interface Board - Ground Mounted |
OO |
22.99 |
Our Price 20.69 |
|
CM-TT111 |
Traintronics |
111 2-Aspect Red/Green with feather right
c/w Interface Board - Ground Mounted |
OO |
22.99 |
Our Price 20.69 |
|
CM-TT112 |
Traintronics |
112 3-Aspect Red/Yellow/Green with feather
left c/w Interface Board - Ground Mounted
|
OO |
24.99 |
Our Price 22.49 |
|
CM-TT113 |
Traintronics |
113 3-Aspect Red/Yellow/Green with feather right
c/w Interface Board - Ground Mounted |
OO |
24.99 |
Our Price 22.49 |
|
CM-TT114 |
Traintronics |
114 4-Aspect with feather left c/w Interface
Board - Ground Mounted |
OO |
26.99 |
Our Price 24.29 |
|
CM-TT115 |
Traintronics |
115 4-Aspect with feather right c/w
Interface Board - Ground Mounted |
OO |
26.99 |
Our Price 24.29 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DCC
|
|
|
|
|
|
|
|
|
|
|
|
CM-TT300 |
Traintronics |
300 DCC& DCC
FITTED SLOW MOTION POINT MOTOR
THIS IS NOT A
To view small print please increase your screen size to 200%
|
|
19.95 |
Our Price 17.95 |
|
CM-TT302 |
Traintronics |
302 DCC& DCC
FITTED BLOCK OCCUPANCY DETECTOR MODULE
THIS IS NOT A |
|
9.95 |
Our Price 8.95 |
|
|
|
|
|
|
|
|
|
|
TRAINTRONICS SIGNAL STRUCTURES |
|
|
|
|
CM-TT180 |
Traintronics |
Modern Style 4 track Gantry Kit (Signal heads not included) OO |
|
29.99 |
26.99 |
|
|
|
This kit is a Brass thin plate pressing and needs to be
soldered together |
|
|
|
|
CM-TT181 |
Traintronics |
Steam Era 4 Track Gantry Kit (Signal heads not included) OO |
|
17.50 |
15.75 |
|
|
|
This kit is a Brass thin plate pressing and needs to be
soldered together |
|
|
|
|
CM-TT280 |
Traintronics |
N GAUGE SIGNAL GANTRY
|
|
25.00 |
22.50 |
|
|
|
|
|
|
|
DAPOL PLASTIC
|
|
|
|
|||||||||||
|
|
|
|
|||||||||||
|
|
|||||||||||||
|
This plastic Gantry comes with three
dummy non working colour light signals. Some modelers drill a small hole in the
centre of each dummy aspect and fit small LEDs into the holes. Can be quite effective. Or use ECKON Wall Signal Kits. ENES10 or 11 or 12 ,
or Traintronics Heads shown above. |
|
|
|
||||||||||
|
www.cravenmodels.com/ECKON.htm << Click |
|
|
|
||||||||||
WARNING DELICATE
ELECTRICS / ELECTRONICS
Beware of STATIC
ELECTRICITY on HANDS & TOOLS
DCC and ELECTRONIC COMPONENT HANDLING.
This Signal Kit contains delicate
electrics / electronic components. Please read the installation
instructions very carefully Several times.
If in any doubt please contact your Local Electronics Expert. Ensure
that you use the correct power supply.
Incorrect installation will cause instant failure and possible short
circuiting.
STATIC ELECTRICITY
Static electricity refers to the build up of electric charge
on the surface of objects. The static charges remain on an object until they
either bleed off to ground or are quickly neutralized by a
discharge.
Although charge exchange can happen whenever any two surfaces come into
contact and separate, a static charge will only remain when at least one of the
surfaces has a high resistance to electrical flow (an electrical insulator).
The effects of static electricity are familiar to most people because we
can see, feel and even hear the spark as the excess charge is neutralized when
brought close to a large electrical conductor (for example a path to
ground),
or a region with an excess charge of the opposite polarity (positive or
negative). The familiar phenomenon of a static 'shock' is caused by the
neutralization of charge.
Static electricity can reside in people, clothing or tools
etc.
The static electricity must be discharged to EARTH before handling any
delicate electronic components or computer components.
Use of Magnetic tools should be avoided at all times.
Cravenmodels
Modeltrainsuk
Warranty and Returns www.cravenmodels.com/TERMS.htm
SIGNAL NUMBERS INCLUDED
NOTE - THE ENCLOSED
DIAGRAMS
YOU MUST FOLLOW THE
MANUFACTURERS INSTRUCTIONS.
|
WARNING DELICATE
ELECTRICS / ELECTRONICS Beware of STATIC
ELECTRICITY on HANDS & TOOLS DCC
and ELECTRONIC COMPONENT HANDLING. This
Signal Kit contains delicate electrics
/ electronic components. Please read the installation instructions very
carefully Several times. If
in any doubt please contact your Local Electronics Expert. Ensure that you
use the correct power supply. Incorrect
installation will cause instant failure and possible short circuiting. STATIC
ELECTRICITY Static
electricity refers to the build up of electric charge
on the surface of objects. The static charges remain on an object until they
either bleed off to ground or are quickly neutralized by a
discharge. Although
charge exchange can happen whenever any two surfaces come into contact and
separate, a static charge will only remain when at least one of the surfaces
has a high resistance to electrical flow (an electrical insulator). The
effects of static electricity are familiar to most people because we can see,
feel and even hear the spark as the excess charge is neutralized when brought
close to a large electrical conductor (for example a path to
ground), or
a region with an excess charge of the opposite polarity (positive or
negative). The familiar phenomenon of a static 'shock' is caused by the
neutralization of charge. Static electricity can reside in people, clothing or tools
etc. The
static electricity must be discharged to EARTH before handling any delicate
electronic components or computer components.
Use
of Magnetic tools should be avoided at all times. Cravenmodels Modeltrainsuk Warranty
and Returns www.cravenmodels.com/TERMS.htm
CRAVENMODELS MODELTRAINSUK MODEL RAILWAY Beware of STATIC
ELECTRICITY on HANDS & TOOLS YOU WILL BE SUPPLIED WITH A IF YOU These products are not toys and Children need to be supervised by an adult
at all times. THE CORRECT POWER SUPPLY MUST BE USED AT There are many different power supplies available within the Model
Industry. It is your responsibility to ensure that you use the correct supply
and ensure that the correct polarity is used. Please read all the manufacturers instructions before attempting to
connect any power supply to an electrical device. If you do not have the necessary knowledge, skills or experience you
should employ a Local Qualified Electronics engineer. Using an INCORRECT power supply and or INCORRECT POLARITY will damage
the product. It may or may not work initially but may burn out due to incorrect
voltage or amperage or polarity being used. There are supplies that are DC or AC. The correct one must be used. Some products call for the use of Diodes and or Resistors and or
Regulators or Decoders and or Controllers. Please use the correct ones. For further information please email
or telephone 01588 660580 or goto www.cravenmodels.com
WARNING DELICATE
ELECTRICS / ELECTRONICS This Signal Kit contains delicate
electrics / electronic components. Please read the installation instructions very carefully Several
times. If in any doubt please contact your Local Electronics Expert. Ensure
that you use the correct power supply. Incorrect installation will cause instant failure and possible short
circuiting invalidating any warranty. Cravenmodels Modeltrainsuk |
|
Facilities & Services
- Please click on box required |
Cravenmodels International Mail
Order Company
Craven Model Centre, Bungalow Railway Workshops, Purslow Estate, Craven Arms,
Tel: 01588 660
580 cravenmodels@btconnect.com
INTERNET TRADING FOR OVER 12 YEARS